Configure JTAlert to Send Text Msg or Email User Alerts

JTAlert has the ability to alert the user (you) by playing an audible message for Wanted States, New DXCC, New Zone, New Grid, or several other decodes you want to be notified about when it decodes a callsign matching one of your "Needs."  This feature has garnered me several New Ones on 6-M (both DXCC's and Grids) by playing an audio message of "Wanted Call," "New Country," "New State," "New Grid," or any of a dozen or so other alerts.  This feature is wonderful as long as you are close enough to your computer to hear that audible alert from your computer's speakers. 

But what about when you are too far away to hear that alert?  To solve that problem Bill, WTØDX, has written a procedure to allow JTAlert to send a Text Message and/or an Email in addition to that audible alert using JTAlert's User Alert feature.  Zowie!  I would say this procedure is the "Bee's Knees" but you have to be "of a certain age" to understand that phrase!  Maybe I should call it "Lit", or "Dope" or "Fire" to be more current in my slang.  In any event, I think this is Absolutely AWESOME!

I  was lucky to be a "Beta Tester" for this procedure.  My findings were that "Anyone with a rudimentary knowledge of creating folders and working with text files should be able to follow this procedure with no problems." It took me exactly 1 hour to complete the procedure AND record 2 pages of notes at the same time.  I did already have a Gmail account with 2-Step Verification enabled so that gave me a bit of a head start.

The procedure is contained in a 19-page PDF file.  It is that long because it has a LOT of screenshots to make each step easy to follow.  An overview of the procedure is:

- Create Gmail email account (optional if you already have a Gmail account you want to use)
- Enable 2-Step Verification for the account
- Generate an Application Password for that account
- Edit the Send Alert file and save as a batch file
- Download CMail application
- Store Send Alert batch file and CMail application in a folder
- Configure JTAlert
- Test

You can download the PDF file plus two text files (Send Alert.txt and CMail test.txt) which are described in the procedure, as a ZIP file from this link:  JTAlert User Alert Files.  UnZIP that file then follow the procedure in the PDF file.

Below are screenshots of an email and a text message created by this procedure.  I had left my radio receiving on 17-M and JTAlert decoded 4L7T which would be a New One for me.  It then sent me the email and text messages shown below.  (I missed working 4L7T because I was on the mower and did not hear my phone ding!)

4L7T Email + Text Message

The latest version of JTAlert is 2.60.10 available HERE.  My version is 2.60.5 (Build date: 7-Feburary-2023) and this procedure worked just fine with my older version.

Combine the above procedure to alert you to needed callsigns which your own station copies with the HamAlert feature which will send you a text message when a needed entity is spotted on the Cluster or reported to PSKReporter, and you have covered all the bases.  Here is a Post detailing the HamAlert notification feature: DX Spots that "Only YOU Need on Your Phone.

UPDATE RE Verizon Wireless:

For those of you with Verizon Wireless, please read the following article regarding a new "feature" to disable email to text messages. 

If you have turned off email to text "spam" messages, then you will not receive the alerts.  (Thanks to Jim KC4HW for pointing this out).

https://www.cnbc.com/2023/08/29/verizon-has-a-new-way-for-customers-block-email-to-text-spam-messages.html

--
73 Bill WT0DX